電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>傳感與控制>基于DS18B20的溫控系統冷熱調節設計

基于DS18B20的溫控系統冷熱調節設計

2011-01-05 | rar | 855 | 次下載 | 10積分

資料介紹

提出一種高精度、系統穩定性較好的溫度調節設計方法。采用Atmel公司的AT89S51作為控制核心,以DS18B20作為主要溫度測量和變送元件,結合小鍵盤、固態繼電器(SSR)等外圍電路,進行光電隔離,根據指令要求,利用小功率直流電快速控制220 V交流電通斷。在軟件處理程序中加入抗干擾能力強的限速數字濾波,并利用積分分離PID算法,使積分作用在溫度值接近目標值時才起作用,有效降低啟、停頻繁時給系統帶來的振蕩。為提高溫度測量值的精度,利用MATLAB對溫度數據進行曲線擬合,進一步對溫度值進行校正。結果表明,溫控系統的模塊化設計與MATLAB相結合,提高了系統的抗干擾性、穩定性并使測量值的誤差減少到5%以下。
Abstract:
?This paper proposed a design method of temperature regulation with high precision and good stability. Used Atmel corporation’s AT89S51 as the control core,taken DS18B20 as the primary components of temperature measurement and transmission,combined with a small keyboard,solid state relays and other peripheral circuits,to realize optical isolation.The system can fast use the low power direct current to control the on and off of 220V AC according to the instruction requirements. The limited speed filtering is added in the software processing programme to enhance the system’s anti-interference ability. In order to effectively reduce the system’s oscillation which is caused by the starts and stops frequently,the system uses the PID algorithm of integral separated which makes the integral useless until the temperature value approached the target value. In order to improve the accuracy of measured data,it fits the measured data in MATLAB to calibrate the value of temperature. As a result,the combination of the modular design and MATLAB enhances system’s anti-jamming,stability,and makes the measurement error less than 5%.
下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1TC358743XBG評估板參考手冊
  2. 1.36 MB  |  330次下載  |  免費
  3. 2開關電源基礎知識
  4. 5.73 MB  |  11次下載  |  免費
  5. 3100W短波放大電路圖
  6. 0.05 MB  |  4次下載  |  3 積分
  7. 4嵌入式linux-聊天程序設計
  8. 0.60 MB  |  3次下載  |  免費
  9. 5DIY動手組裝LED電子顯示屏
  10. 0.98 MB  |  3次下載  |  免費
  11. 6基于FPGA的C8051F單片機開發板設計
  12. 0.70 MB  |  2次下載  |  免費
  13. 751單片機PM2.5檢測系統程序
  14. 0.83 MB  |  2次下載  |  免費
  15. 8基于51單片機的RGB調色燈程序仿真
  16. 0.86 MB  |  2次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234315次下載  |  免費
  3. 2555集成電路應用800例(新編版)
  4. 0.00 MB  |  33566次下載  |  免費
  5. 3接口電路圖大全
  6. 未知  |  30323次下載  |  免費
  7. 4開關電源設計實例指南
  8. 未知  |  21549次下載  |  免費
  9. 5電氣工程師手冊免費下載(新編第二版pdf電子書)
  10. 0.00 MB  |  15349次下載  |  免費
  11. 6數字電路基礎pdf(下載)
  12. 未知  |  13750次下載  |  免費
  13. 7電子制作實例集錦 下載
  14. 未知  |  8113次下載  |  免費
  15. 8《LED驅動電路設計》 溫德爾著
  16. 0.00 MB  |  6656次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935054次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537797次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420027次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234315次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191186次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183279次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138040次下載  |  免費