資料介紹
This report presents the design of a digital oscilloscope for a Digilent D2SB system board connected to a DIO4 and AIO1 peripheral boards. The AIO1 peripheral board is used for analog signal acquisition and analog to digital conversion; the values obtained from the A/D conversion are routed onto the D2SB system board and stored in a memory module implemented in the FPGA; a video controller, also implemented on the D2SB, fetches these values and generates the appropriate video signals which are sent to the DIO4 peripheral board and used to display an image on a monitor connected to the board. A basic interaction with the user is possible through the buttons and switches of the DIO4 board. The design implements common features of a conventional oscilloscope, such as sampling rate adjustment, hold and triggering. The design is complete, meets all requirements, and it has been verified through simulation and physical implementation.
The design is designed partly in VHDL, partly in schematic drawings and targets a Xilinx Spartan-2E FPGA. However, since the design was tailored specifically for the aforementioned boards it is highly unlikely that it can be ported to other hardware. The circuits were designed on a Windows XP using the Xilinx WebPack 6.2 tool. The transfer of the design to the FPGA was carried out either with the Xilinx Impact tool through a parallel JTAG cable or with the Digilent Export utility through a USB JTAG cable.
The analog signal was obtained from a PC soundcard, being created by third party software, Sonic SoundForge v4.5, also running on Windows XP.
The design is designed partly in VHDL, partly in schematic drawings and targets a Xilinx Spartan-2E FPGA. However, since the design was tailored specifically for the aforementioned boards it is highly unlikely that it can be ported to other hardware. The circuits were designed on a Windows XP using the Xilinx WebPack 6.2 tool. The transfer of the design to the FPGA was carried out either with the Xilinx Impact tool through a parallel JTAG cable or with the Digilent Export utility through a USB JTAG cable.
The analog signal was obtained from a PC soundcard, being created by third party software, Sonic SoundForge v4.5, also running on Windows XP.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- InfiniiVision6000X是德系列數字示波器手冊
- DS1000Z系列數字示波器說明 23次下載
- 數字存儲示波器TDO3000系列使用手冊 1次下載
- 簡易數字存儲示波器設計 410次下載
- 安捷倫數字示波器的結構原理
- 數字示波器的使用基礎教程說明 18次下載
- 設計一個簡易的數字存儲示波器的設計報告免費下載 20次下載
- 設計一個簡易數字存儲示波器的論文免費下載 27次下載
- 簡易數字示波器的設計 56次下載
- 數字示波器的設置介紹并利用計算功能分析熱插拔電路 20次下載
- 數字示波器的使用介紹 0次下載
- 數字存儲示波器中USB接口功能的開發 63次下載
- 基于LabVIEW的虛擬數字示波器的設計與實現
- 示波器的介紹及使用
- 高性能虛擬數字示波器的研究
- 示波器的種類和功能介紹 424次閱讀
- 模擬示波器和數字示波器的區別 1343次閱讀
- 混合示波器與數字示波器的區別 534次閱讀
- 數字示波器的基本原理及結構組成 1673次閱讀
- 數字示波器和模擬示波器的區別 1432次閱讀
- 數字存儲示波器的優缺點是什么 4402次閱讀
- stm32數字示波器操作說明 4677次閱讀
- 示波器應該如何使用示波器的使用方法詳細介紹 7.2w次閱讀
- 數字示波器介紹_數字示波器的優缺點 9752次閱讀
- 數字示波器介紹_數字示波器參數意義 1.5w次閱讀
- 數字示波器的原理及使用方法 7.1w次閱讀
- 數字示波器的作用 示波器頻率計算方法 3.4w次閱讀
- 圖解數字示波器使用教程與作用 1.5w次閱讀
- 模擬示波器與數字示波器的區別 7562次閱讀
- 基于DSP的雙通道數字存儲示波器 3473次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1490次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 92次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 10次下載 | 免費
- 6基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
- 7藍牙設備在嵌入式領域的廣泛應用
- 0.63 MB | 3次下載 | 免費
- 89天練會電子電路識圖
- 5.91 MB | 3次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537791次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233045次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多