資料介紹
The major benefit of this device is its wide VCC range. It can operate from 1.65-V to 5.5-V on the P port side and
on the SDA/SCL side. This allows the TCA6408 to interface with next-generation microprocessors and
microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to
the dropping power supplies of microprocessors and microcontrollers, some PCB components such as LEDs
remain at a 5-V power supply.
The bidirectional voltage level translation in the TCA6408 is provided through VCCI. VCCI should be connected to
the VCC of the external SCL/SDA lines. This indicates the VCC level of the I2C bus to the TCA6408. The voltage
level on the P port of the TCA6408 is determined by VCCP.
The TCA6408 consists of one 8-bit configuration (input or output selection), input, output, and polarity inversion
(active high) register. At power on, the I/Os are configured as inputs. However, the system master can enable
the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is
kept in the corresponding input or output register. The polarity of the input port register can be inverted with the
polarity inversion register. All registers can be read by the system master.
on the SDA/SCL side. This allows the TCA6408 to interface with next-generation microprocessors and
microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to
the dropping power supplies of microprocessors and microcontrollers, some PCB components such as LEDs
remain at a 5-V power supply.
The bidirectional voltage level translation in the TCA6408 is provided through VCCI. VCCI should be connected to
the VCC of the external SCL/SDA lines. This indicates the VCC level of the I2C bus to the TCA6408. The voltage
level on the P port of the TCA6408 is determined by VCCP.
The TCA6408 consists of one 8-bit configuration (input or output selection), input, output, and polarity inversion
(active high) register. At power on, the I/Os are configured as inputs. However, the system master can enable
the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is
kept in the corresponding input or output register. The polarity of the input port register can be inverted with the
polarity inversion register. All registers can be read by the system master.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- TCA6408A-Q1具有中斷輸出的低電壓8位I2C和SMBus I/O擴展器數據表
- TCA8418 I2C控制型鍵盤掃描IC數據表
- TCA4311熱插拔I2C總線緩沖器數據表
- TCA6408A低電壓8位I2C和SMBus I/O擴展器數據表
- TCAL6408 8位轉換I2C總線,SMBus I/O擴展器數據表
- HD-6408 數據表
- HD-6408 數據表
- PROTEUS初級教程.pdf 56次下載
- 《抑制開關磁阻電機振動的結構設計研究》pdf 3次下載
- Mstar 平臺TCA9539 移植
- 臺信標簽傳感器產品TCA-2150A 3次下載
- 臺信標簽傳感器產品TCA-2050A 1次下載
- TCA8418E,pdf(Controlled Keypad
- TCA6408,pdf(Low-Voltage 8-Bit
- HD-6408 pdf datasheet (CMOS As
- PDF輸出時出現錯誤提醒的解決方案 1185次閱讀
- Python中Excel轉PDF的實現步驟 787次閱讀
- 將PDF文件轉換為其他格式文件使用指南 948次閱讀
- 萬興PDF密碼如何查看列出的權限 835次閱讀
- Python怎么批量生成PDF文檔 971次閱讀
- 接近開關TCA505構成的金屬探測電路 6043次閱讀
- 由TCA785可控硅移相觸發器實現的三相全控橋觸發電路 1.3w次閱讀
- 寬禁帶器件和仿真環境介紹 1457次閱讀
- 采用TCA785移相觸發器實現熒光磁粉探傷機可控硅調壓方案的改進 4739次閱讀
- PDF文件有哪些特點是什么? 1.1w次閱讀
- 在貼片加工廠中有哪些安全防護需要了解 1306次閱讀
- 復合放大器實現高精度的高輸出驅動能力 獲得最佳的性能 1600次閱讀
- 用降壓型穩壓器或線性穩壓器電源時值來會為負載供電 984次閱讀
- 鋰電池并聯充電時保護板均衡原理 3w次閱讀
- 使用pdf解析可以用來讀取PDF文件中字符串文本,圖片數據 1.3w次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 4DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 5基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537798次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多