資料介紹
The SN74LVTH32374 is a 32-bit edge-triggered D-type flip-flop designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. This device is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
This device can be used as four 8-bit flip-flops, two 16-bit flip-flops, or one 32-bit flip-flop. On the positive transition of the clock (CLK), the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
OE does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
- 具有3態輸出的3.3-V ABT 16位緩沖器/驅動器SN54LVTH16541 SN74LVTH16541數據表
- 具有3態輸出的3.3-V ABT 16位緩沖器/驅動器SN54LVTH162541 SN74LVTH162541數據表
- 具有3態輸出的3.3-V ABT 16位緩沖器/驅動器SN74LVTH16244A-EP數據表
- 具有3態輸出的3.3-V ABT 16位總線收發器SN74LVTH16245A-EP數據表
- 具有3態輸出的3.3-V ABT 16位緩沖器/驅動器SN54LVTH16240 SN74LVTH16240數據表
- 具有3態輸出的3.3-V ABT 16位邊緣放大D型觸發器SN54LVTH162374 SN74LVTH162374數據表
- 3.3-V ABT 16位透明D型三態輸出鎖存器SN54LVTH162373 SN74LVTH162373數據表
- 3.3-V ABT 16位透明D型三態輸出鎖存器SN54LVTH16373 SN74LVTH16373 數據表
- 具有3態輸出的3.3-V ABT 16位總線收發器SN74LVTH16245A數據表
- SN74LVTH32373,pdf(3.3-V ABT 32
- SN74LVTH322374,pdf(3.3-V ABT 3
- SN74LVTH32245,pdf(3.3-V ABT 32
- SN74LVTH16245A-Q1,pdf(3.3-V AB
- SN74LVTH32244,pdf93.3-V ABT 32
- SN54LVTH540, SN74LVTH540,pdf(3.3-V ABT 16-BIT BUFFERS/DRIVER
- 如何將5V輸出安全轉換為3.3V輸入 3291次閱讀
- 3.3V穩壓電源設計 5286次閱讀
- 9種實用的將3.3V輸出連接到5V輸入的方法! 3382次閱讀
- 如何將5V系統的輸出接到3.3V系統的輸入上呢 3256次閱讀
- 基于雙口RAM和SN74LVTH245A芯片實現長距離數據傳輸系統的設計 3802次閱讀
- 3.3轉5V的電平相互轉換電路設計 2.2w次閱讀
- 如何運行自己的ABT鏈節點 889次閱讀
- 淺談SN74HC541特征應用及設備信息 3570次閱讀
- 分享SN74HC541N集成塊的功能及邏輯圖函數表 1.1w次閱讀
- 電源中的+12V/+5V/+3.3V都給哪些硬件供電? 3.9w次閱讀
- 3.3v穩壓電路電容作用 3.3v穩壓電路典型電路圖及分析 3.9w次閱讀
- 5V轉3.3V如何設計方案? 3990次閱讀
- 12v轉3.3v電路圖大全(五款12v轉3.3v電路原理圖詳解) 8.4w次閱讀
- SN74LS161在數字電路中的抗干擾應用 7065次閱讀
- 隔離式3.3V轉5V轉換器的分立設計 4155次閱讀
下載排行
本周
- 1純電動汽?的主要部件及?作原理
- 5.76 MB | 8次下載 | 5 積分
- 2無鉛焊接的可靠性
- 1.03 MB | 5次下載 | 1 積分
- 3Type-C VL160數據手冊
- 0.92 MB | 3次下載 | 3 積分
- 4電流電壓傳感器V10
- 8.02 MB | 3次下載 | 免費
- 5DCMA-82 802.11abg高功率MiniPCI卡
- 0.84 MB | 2次下載 | 免費
- 6BLDC電機的無傳感器梯形控制
- 1.76MB | 2次下載 | 免費
- 7明偉電源模塊RSP-3000圖紙
- 0.30 MB | 2次下載 | 免費
- 8800VA純正弦波逆變器的參考設計
- 2.96MB | 2次下載 | 免費
本月
- 1ACDC變換器的原理圖免費下載
- 0.26 MB | 65次下載 | 免費
- 2無刷電機控制方案設計合作
- 1.05 MB | 20次下載 | 免費
- 3美的超薄電磁爐TM-S1-09B主板原理圖
- 0.08 MB | 20次下載 | 免費
- 4GP328和GP88S對講機的維修實列資料合集免費下載
- 0.03 MB | 10次下載 | 10 積分
- 5舒爾SLX4無線話筒接收機原理圖:二次變頻超外差部分
- 0.27 MB | 8次下載 | 免費
- 6純電動汽?的主要部件及?作原理
- 5.76 MB | 8次下載 | 5 積分
- 7TPS55288布局指南
- 1.75MB | 7次下載 | 免費
- 8i.MX Linux開發實戰指南—基于野火i.MX系列開發板
- 17.86 MB | 6次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935115次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191363次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81580次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73805次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多