電力變壓器優化設計軟件包的實現

電力變壓器優化設計軟件包的實現3333齊彥力, 胡　鋼(吉林電子信息職業技術學院計算機工程系, 吉林吉林132021)
摘要: 鑒于電力變壓器人工設計生產成本高、精度及產品質量偏低等弊端, 提出一個基于計算處理技術進行電力變壓器優化設計的方案, 給出了電力變壓器優化設計與實施的基本過程及其主要技術方法。通過VisualL ISP編程方法, 將設計結果放置在AutoCAD 桌面設計環境中, 在CAD (Computer2Aided Design) 處理環境的支持下, 用戶可獲得變壓器優化設計方案。與人工設計相比, 新方法設計成本、材料成本降低15%左右, 精度與產品質量明顯提高, 并解決了一般軟件包設計方案完成后需要二次完善的問題。
關鍵詞: 電力變壓器; 參數調整; 優化設計; 軟件包
中圖分類號: TP393107; TM41　　　文獻標識碼: A
Realization of Software Package of Op timization
Design for Electric Power Transformer
Q I Yan2li, HU Gang
(Department of Computer Engineering, J ilin Vocational and Technological College of Electronic Information, J ilin 132021, China)
Abstract: An op timization design scheme of the transformer based on computational and treatment technique is
p roposed against numerous abuses of manual design of electric power transformer, such as the high p roduction
cost, the low quality and short p recision of p roducts. The basic design flowchart of the op timization scheme and
the main technicalmethods are illustrated including how to put forward the design results on AutoCAD desktop
environment by usingVisualL ISP p rogramming. We can obtain the op timization design scheme for electric power
transformer under the support of CAD (Computer2Aided Design) operation environment, which does not need
re2modification after op timization as the ordinary design of software package. Compared with manual design, the
design and material costwas cut by about 15 per cent, while the p roducts p recision and quality is imp roved obvi2
ously.Key words: electric transformer; parameter adjust; op timization design; software package
引　言
應用計算機數據處理技術解決電力變壓器的優化設計問題現已趨于普遍, 但尚存諸如繞組型式單一[ 1 ] 、器身結構個性化考慮不周以及設計結果難于直接形成標準工藝文檔等問題。筆者給出了一個具有實踐背景的用于解決電力變壓器優化設計問題的系統方案, 這一方案著眼于廣泛的設計需求特征, 堅持設計依據嚴謹、靈活的原則, 以最終形成標準工程圖紙為目標。為謀求AutoCAD工程圖的處理環境,該系統應用了Visual L ISP的編程技術, 在數據庫環境的支持下, 將設計結果直接帶入AutoCAD設計平臺并映射成相應的視圖, 使其進入標準的AutoCAD工程圖管理流程。本方案使變壓器優化設計結果直接成為生產工藝文件。該軟件包的投入使用從根本上解決了人工設計原材料用量大、生產成本高、周期長、設計精度和產
品質量偏低等問題, 并克服了一般軟件包設計方案完成后還需進一步人工“修飾”的問題, 大大提高了經濟效益。