資料介紹
新材料打開電源轉換設計的選擇
旨在提高能源效率的開關電源設計人員面臨著一些權衡,這些問題往往涉及到成本和復雜性的增加,或者如果與傳統的硅功率器件相匹配,則會降低功率密度。寬帶隙材料,如碳化硅(SiC)提供了一個新的自由度在功率轉換器的設計,尤其是在高功率額定需要。
寬禁帶和臨界電場導致較高的擊穿電壓:比硅高十倍。這使得可以制造更薄和更小的器件,這樣即使SiC的載流子遷移率比硅的差,但它可以攜帶更少損耗的更多電流。最重要的是,高得多的熱導率會大大提高功率密度。碳化硅器件可以在150℃以上的結溫下可靠地運行,有助于節省散熱片和包裝成本。
該技術仍在發展,并沒有一個完整的設備組合,但有越來越多的二極管和第一個商業MOSFET已經啟動。本文將提供功率轉換碳化硅產品概述,包括設備從克里(cmf10120d,cmf20120d,csd01060),英飛凌科技(idd03sg60c),IXYS(fbs16-06sc)、ROHM(scs120ke2c)和STMicroelectronics(stpsc2006cw)。
Tradeoffs are commonplace in power-component design. Properties that are good for energy efficiency – such as low on-resistance – can lead to process and design decisions that result in less desirable characteristics such as reduced breakdown voltage. Although silicon remains the material of choice for most power devices, other options are appearing that will make it possible to reduce the effects of these tradeoffs. Options have opened up thanks to the arrival of two wide band-gap materials now being actively investigated and productized by manufacturers. One is gallium nitride (GaN) and the other is silicon carbide (SiC)。
The band-gaps of GaN and SiC are around three times larger than the band-gap of conventional silicon. The critical field rating is approximately ten times higher than that of silicon. This leads not just to higher breakdown voltages, but better performance at high temperatures, which reduces the cost of power-supply products by allowing the use of smaller or even no heatsinks, as well as lower leakage.
- 2021 Ferroxcube 新材料推廣 en V1
- 臺階儀:亞埃級垂直分辨率,新材料納米加工的測量利器!
- 通過串口燒寫STM32程序的教程方法 0次下載
- 如何選擇常用的修軸材料 6次下載
- 打開模塊DevicePowerOn電源失敗
- DC電源轉換方案設計
- 開關電源中磁性電子元器件綜述 0次下載
- 開關電源的磁芯材料與磁元件技術綜述 58次下載
- LED驅動電源的拓?fù)浣Y(jié)構選擇綜述 32次下載
- 開關電源組件選擇 40次下載
- 寬輸入范圍電路模式DC-DC升壓轉換器芯片XL6009 17次下載
- 采用電流模式DC-DC升壓轉換器調節器HM6297 27次下載
- pdf轉換成word轉換器下載 110次下載
- 熱處理技術應對新工藝新材料的挑戰
- 輸變電工程新材料的應用研究與展望
- X射線工業CT檢測設備用于復合新材料內部缺陷檢測 62次閱讀
- 關于一些有助于優化電源設計的新型材料 170次閱讀
- 芯片封裝底部填充材料如何選擇? 158次閱讀
- 半導體襯底材料的選擇 1342次閱讀
- 常見的光熱轉換材料有哪些? 5347次閱讀
- 后摩爾時代芯片互連新材料及工藝革新 790次閱讀
- 2020年全球新材料產業發展趨勢概況 6394次閱讀
- 車載電源轉換器怎么選擇_車載電源轉換器怎么接 6639次閱讀
- 新型電池發展方向_未來10大最具潛力的鋰電池新材料 2.9w次閱讀
- 動力電池生產流程,電池材料選擇 4550次閱讀
- 遇見新材料行業的未來 3919次閱讀
- LED驅動電源的分類、選擇及使用注意事項 4569次閱讀
- 新材料的應用 7168次閱讀
- 新材料界定與分類 5833次閱讀
- 石墨烯、納米銀線等觸控新材料崛起:應用分析 5253次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 6次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5基于FPGA的光纖通信系統的設計與實現
- 0.61 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機大棚環境控制器仿真程序
- 1.10 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6653次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537796次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191185次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多