資料介紹
To assure proper communication on the three SPI lines, it
is necessary to connect ground on the programmer to
ground on the target (GND)。
To enter and stay in Serial programming mode, the AVR
microcontroller reset line has to be kept active (low)。 Also,
to perform a Chip Erase, the Reset has to be pulsed to end
the Chip Erase cycle. To ease the programming task, it is
preferred to let the programmer take control of the target
microcontroller reset line to automate this process using a
fourth control line (Reset)。
To allow programming of targets running at any allowed
voltage (2.7V - 6.0V), the programmer can draw power
from the target system (VCC)。 This eliminate the need for a
separate power supply for the programmer. Alternatively,
the target system can be supplied from the programmer at
programming time, eliminating the need to power the target
system through its regular power connector for the duration
of the programming cycle.
Figure 2 shows the connector used by this In-System programmer to connect to the target system. The standard
connector supplied is a 2 x 3 pin header contact, with pin
spacing of 100 mils.
- AVR的自編程功能
- Practical-Programming-on-Android-Introduction
- YNH-910 收款機主板規格書
- The Linux Programming Interface - A Linux and UNIX System Programming Handbook 7次下載
- XAPP424 - 嵌入式JTAG ACE播放器 20次下載
- PLD Programming Using VHDL 0次下載
- 8位AVR單片機產品手冊下載
- LPC1300系列產品勘誤數據手冊
- FGPAs應用資料
- 對16位微控制器C163-16F內的128 KBytes閃速
- JTAG先進的功能和系統設計,JTAG Advanced C
- 用標準連續矢量格式文件對XC9500器件在系統編程,并用自動
- 用標準連續矢量格式文件對XC9500器件在系統編程,并用自動
- C5xx / 80C5xx In-System FLASH
- LPC2000 pdf datasheet
- Microchip AVR DD系列微控制器產品特性 490次閱讀
- AVR單片機實現輪胎內徑測量系統的設計 1062次閱讀
- 微雪電子USB AVR JTAG ICE XPII下載器簡介 4040次閱讀
- 微雪電子AVR JTAG仿真器簡介 2601次閱讀
- 碩數物聯科技RSC-910主板介紹 2317次閱讀
- AVR單片機與CPLD的通信設計 1100次閱讀
- AVR單片機的串口查詢設計 901次閱讀
- AVR單片機的優勢特征及未來發展展望 5705次閱讀
- 華為PTN910時鐘接口指標_參數及特點介紹 1.4w次閱讀
- 為什么要選擇AVR單片機? 1728次閱讀
- avr單片機功能特性介紹 1403次閱讀
- avr和arduino之間有什么關系?avr單片機和arduino的優點分析 3w次閱讀
- AVR單片機的主要特性 895次閱讀
- FPGA開發之算法開發System Generator 7679次閱讀
- AVR單片機有什么優點_為什么要選擇AVR單片機 2420次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 6次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5基于FPGA的光纖通信系統的設計與實現
- 0.61 MB | 2次下載 | 免費
- 6基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 751單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21548次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6653次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537796次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191185次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183278次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多