基于嵌入式X86的數控系統的設計與實現

為了降低開發成本，縮短開發周期，提高系統性能和穩定性，本文采用嵌入式X86 CPU
和嵌入式ARM處理器上下位機的硬件結構形式。按照Linux操作系統下設備驅動程序開發的一般步驟和基本結構，采用模塊化開發的基本思路，對基于ARM處理器嵌入式數控系統運動控制卡驅動程序進行優化開發，保證了嵌入式運動控制卡在Linux環境下的高可靠性工作。本文深入研究了嵌入式數控系統硬件設計、硬件選型和軟件架構設計與實現。
關鍵字: 嵌入式X86；調度；ARM；運動控制板
Abstract: In order to reduce development costs and shorten the development cycle, improve
system performance and stability， this paper use embedded X86 CPU and embedded ARM
processor machine in the form of hardware.According to the structure and development step of device drive program deeply under Linux OS,with the idea of modularize,the driver of motion control card based on ARM CPU is developed,which assure the reliable work of embedded motion control card under Linux. In this paper, in-depth study of the NC embedded systems hardware design, selection of hardware and software architecture design and implementation.
Keywords: Embedded X86; Scheduler; ARM; Motion control plate