資料介紹
由于在直接轉矩控制中一個周期內只能給定一個工作電壓矢量,且會產生周期性的偏
差,控制系統不能實時的給出新的控制信號,因而會產生較大的轉矩脈動。本文提出了一種新的減小轉矩脈動的直接轉矩控制方法,在傳統異步電機直接轉矩控制的基礎上推導出轉矩微分方程,分析了轉矩脈動的原因,根據轉速與轉矩的關系,預先判斷控制時間誤差,通過時間誤差的變化量改變轉速給定值,達到減小轉矩脈動的目的。實驗結果表明,該方法可使轉矩快速地收斂于給定值,能夠有效地減小轉矩脈動。
關鍵詞:直接轉矩控制;轉矩脈動;轉速補償;
Abstract: in the direct torque control(DTC) systems, because a voltage vector can be given in one periodicity in the direct torque control(DTC) systems, the system will produce the large torque ripple. A new torque differential equation was deduced and the reasons for torque ripple were analyzed. The control strategy introduced the idea of torque prediction to reduce the torque ripples, and according to the relationship between the rotational speed and torque, predicting the error of control period and changing the rotational speed which have been given, It can reduce the torque ripple usefully. Experimental results show that the proposed strategy can rapidly converge on the set torque value and decrease the torque ripple effectively,and have the same dynamic performance as the conventional DTC.
Key words: direct torque control (DTC); torque ripple; rotational speed compensate;
差,控制系統不能實時的給出新的控制信號,因而會產生較大的轉矩脈動。本文提出了一種新的減小轉矩脈動的直接轉矩控制方法,在傳統異步電機直接轉矩控制的基礎上推導出轉矩微分方程,分析了轉矩脈動的原因,根據轉速與轉矩的關系,預先判斷控制時間誤差,通過時間誤差的變化量改變轉速給定值,達到減小轉矩脈動的目的。實驗結果表明,該方法可使轉矩快速地收斂于給定值,能夠有效地減小轉矩脈動。
關鍵詞:直接轉矩控制;轉矩脈動;轉速補償;
Abstract: in the direct torque control(DTC) systems, because a voltage vector can be given in one periodicity in the direct torque control(DTC) systems, the system will produce the large torque ripple. A new torque differential equation was deduced and the reasons for torque ripple were analyzed. The control strategy introduced the idea of torque prediction to reduce the torque ripples, and according to the relationship between the rotational speed and torque, predicting the error of control period and changing the rotational speed which have been given, It can reduce the torque ripple usefully. Experimental results show that the proposed strategy can rapidly converge on the set torque value and decrease the torque ripple effectively,and have the same dynamic performance as the conventional DTC.
Key words: direct torque control (DTC); torque ripple; rotational speed compensate;
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 異步電機直接轉矩控制學習
- 異步電機直接轉矩控制simulink仿真
- 基于DSP的異步電機直接轉矩控制系統 9次下載
- 基于Matlab-Simulink的異步電機直接轉矩控制系統仿真 24次下載
- 異步電機的直接轉矩控制 6次下載
- 異步電機直接轉矩控制系統研究---開題報告 2次下載
- 異步電機無速度傳感器直接轉矩控制系統 1次下載
- 異步電機無速度傳感器直接轉矩控制系統研究 10次下載
- 基于模糊控制器的異步電機直接轉矩控制 75次下載
- 異步電機直接轉矩弱磁控制研究 38次下載
- 基于EKF的異步電機直接轉矩控制系統
- 基于轉速補償的異步電機直接轉矩控制
- 異步電機直接轉矩控制系統的Matlab仿真
- 基于模糊DSVM控制策略的異步電機直接轉矩控制
- 基于DSP的新型異步電機直接轉矩控制系統
- 交流異步電機的原理與結構 787次閱讀
- 同步電機與異步電機變頻器的區別 1048次閱讀
- 同步電機與異步電機的區別 767次閱讀
- 伺服電機和異步電機的區別 3862次閱讀
- 永磁電機和異步電機的區別 3318次閱讀
- 異步電機和同步電機的區別 5404次閱讀
- 對基于SVM改進型的異步電機直接轉矩控制算法進行梳理 1072次閱讀
- 同步電機和異步電機的優缺點 2.2w次閱讀
- 三相異步電機的轉子旋轉原理 1.1w次閱讀
- 直接轉矩控制模式在潛油永磁同步電機上的控制應用 3244次閱讀
- 同步電機和異步電機到底有什么區別 11.8w次閱讀
- 永磁同步電機與異步電機性能比較 1w次閱讀
- 異步電機和同步電機的區別差異,三相異步電機的正反轉原理圖解 4.2w次閱讀
- 異步電機與變頻電機的區別 3717次閱讀
- 變頻電源在異步電機疊頻法溫升試驗中的應用 4852次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1490次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 93次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 10次下載 | 免費
- 6基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 3次下載 | 免費
- 8基于單片機的紅外風扇遙控
- 0.23 MB | 3次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537791次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多