資料介紹
Data-dependent jitter of transmitter for Non-Framed PRBS and SDH-Framed signal weresimulated. The results
showed that Jitter evaluation for transmitters should be identical to the Framed pattern used at the final
equipment testing.
?2006 Optical Society of America.
Introduction
When performing Jitter generation tests on optical transmitters for SDH/SONET/OTN, most device vendors use a
data pattern with randomly generated transitions like a Non-Framed Pseudo-Random Bit Sequence (PRBS) as a
test pattern. In contrast, when these devices are installed in transmission equipment, the final Jitter evaluation is
performed with an actual data pattern used by SDH/SONET/OTN which is Framed. As a consequence, there is
often a problem of inconsistent Jitter values between device vendors and equipment vendors. There are two main
reasons for this difference. First, the theoretical difference of Jitter values of the device under test (DUT) for the
Non-Framed and Framed signals, and parameters of DUT causing the difference, have never been verified
quantitatively. Second, the measurement error of the measurement method used by many Jitter testers (convert
Data signal to Clock and measure Clock Jitter) for the Non-Framed and Framed signals has never been quantified
and verified. This paper examines how the test data pattern affects the Jitter results by simulating measuring
equipment modeling the DUT and Jitter measurement method.
showed that Jitter evaluation for transmitters should be identical to the Framed pattern used at the final
equipment testing.
?2006 Optical Society of America.
Introduction
When performing Jitter generation tests on optical transmitters for SDH/SONET/OTN, most device vendors use a
data pattern with randomly generated transitions like a Non-Framed Pseudo-Random Bit Sequence (PRBS) as a
test pattern. In contrast, when these devices are installed in transmission equipment, the final Jitter evaluation is
performed with an actual data pattern used by SDH/SONET/OTN which is Framed. As a consequence, there is
often a problem of inconsistent Jitter values between device vendors and equipment vendors. There are two main
reasons for this difference. First, the theoretical difference of Jitter values of the device under test (DUT) for the
Non-Framed and Framed signals, and parameters of DUT causing the difference, have never been verified
quantitatively. Second, the measurement error of the measurement method used by many Jitter testers (convert
Data signal to Clock and measure Clock Jitter) for the Non-Framed and Framed signals has never been quantified
and verified. This paper examines how the test data pattern affects the Jitter results by simulating measuring
equipment modeling the DUT and Jitter measurement method.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- QCC3086_WLCSP_DATA_SHEET
- Audio Effects Tutorial 0次下載
- 激光器設計軟件LASCAD介紹
- Agilent Utilizing TDR and VNA
- Polarization Dependent Loss Me
- Voltage Effects-Yarn Spinning
- Effects of High Switching Freq
- Effects of Feedback Capacitanc
- THE EFFECTS OF VIAS ON PCB TRA 0次下載
- The Effects of Processing Cond
- Effects of adsorption interfer
- Polarization Effects in Semico 0次下載
- The effects of vias on PCB tra 0次下載
- The effects on digital signals 0次下載
- THE EFFECTS OF VIAS ON PCB TRA 0次下載
- USB-C Port的Data Role、Power Role工作原理介紹 1055次閱讀
- Data flash在CS+的應用 1286次閱讀
- 使用tf.data進行數據集處理 1092次閱讀
- Lombok同時使用@Data和@Builder的一個必須要避開的巨坑 1823次閱讀
- RL78/G23 Data flash使用教程 2460次閱讀
- AC耦合電容的選值需要考量的因素 1614次閱讀
- LEMO產品進入EPLAN Data Portal部件數據庫 3060次閱讀
- 在貼片加工廠中有哪些安全防護需要了解 1306次閱讀
- 復合放大器實現高精度的高輸出驅動能力 獲得最佳的性能 1600次閱讀
- 用降壓型穩壓器或線性穩壓器電源時值來會為負載供電 984次閱讀
- tf.data API的功能和最佳實踐操作 1.2w次閱讀
- 構建簡單數據管道,為什么tf.data要比feed_dict更好? 4434次閱讀
- 如何使用Data Visualizer查看L21的運行功耗_步驟教程 3629次閱讀
- 實例分析MCU的Data Flash訪問控制 1.5w次閱讀
- 瞄準Big Data異質網路商機 晶片廠猛攻OTN乙太網方案 1958次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多