資料介紹
As the modular DC-DC converter industry realizes greater power densities, proper thermal management must be achieved in order to get the most usable power to the load.
Efficiency, while an important element in thermal management, is not the only item to consider. Dealing with
the heat generated by the conversion process should not
be underestimated nor overlooked when designing or
selecting a power supply.
All power product manufacturers specify the maximum
operating temperature of their products. Product reliability
and operating life are inversely proportional to operating
temperature. Assuring a robust design requires that the
temperature limit not be exceeded under any operating
conditions and that sufficient margin be built in. This requires
careful analysis, understanding of the application and
verification through experimentation that the chosen
thermal management approach can deal effectively with
the environmental and load induced demands.
The first step in this process is to determine the worst-case
power dissipation that the system is likely to develop. Use the
following equations to determine the efficiency of the converter over the desired operating range and the maximum loading the device will deliver. Conversion efficiency is defined as:
Efficiency, while an important element in thermal management, is not the only item to consider. Dealing with
the heat generated by the conversion process should not
be underestimated nor overlooked when designing or
selecting a power supply.
All power product manufacturers specify the maximum
operating temperature of their products. Product reliability
and operating life are inversely proportional to operating
temperature. Assuring a robust design requires that the
temperature limit not be exceeded under any operating
conditions and that sufficient margin be built in. This requires
careful analysis, understanding of the application and
verification through experimentation that the chosen
thermal management approach can deal effectively with
the environmental and load induced demands.
The first step in this process is to determine the worst-case
power dissipation that the system is likely to develop. Use the
following equations to determine the efficiency of the converter over the desired operating range and the maximum loading the device will deliver. Conversion efficiency is defined as:
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 應用說明:AS726x_AN000490_1-00.pdf
- 應用說明:AS726xN_AN000558_1-00.pdf
- 無線電接收機Design Considerations for Direct 6次下載
- 高功率電路的布局考量 14次下載
- 多遠程二極管溫度傳感器 (Design Considerat
- LDO Thermal Calculations
- Thermal Management Handbook
- Security Considerations for Vo
- LDO Thermal Calculations
- Thermal Considerations for Pow
- THERMAL DESIGN OF POWER MOSFET
- Thermal Considerations
- Thermal Characterization of Pa
- HFAN-08.1: Thermal Considerati
- Thermal considerations for adv
- MEMS工藝中快速退火的應用范圍和優勢介紹 1261次閱讀
- 熱傳遞的三種方式是什么 1516次閱讀
- 電源管理入門:Thermal熱管理 3116次閱讀
- FDA,CE將要執行EMC新版標準:IEC 60601-1-2: 2014+A1:2020 ED4.1 7137次閱讀
- Arm系列-智能功率分配IPA技術 1114次閱讀
- 熱管理系統建模案例:各個回路的搭建 1677次閱讀
- Thermal框架源碼剖析 2202次閱讀
- 寬禁帶器件和仿真環境介紹 1457次閱讀
- 在貼片加工廠中有哪些安全防護需要了解 1305次閱讀
- 復合放大器實現高精度的高輸出驅動能力 獲得最佳的性能 1600次閱讀
- 用降壓型穩壓器或線性穩壓器電源時值來會為負載供電 984次閱讀
- 鋰電池并聯充電時保護板均衡原理 3w次閱讀
- 更小更智能的電機控制器推進HEV/EV市場 1105次閱讀
- 紅外熱釋電傳感器與紅外傳感器差異對比 2.2w次閱讀
- 熱焊盤與反焊盤 1.6w次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 6次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5基于FPGA的光纖通信系統的設計與實現
- 0.61 MB | 2次下載 | 免費
- 651單片機窗簾控制器仿真程序
- 1.93 MB | 2次下載 | 免費
- 751單片機大棚環境控制器仿真程序
- 1.10 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6653次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537796次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191185次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多